Similar Posts
FLAMINGO BUCKINGS
The Flamingo buckings are something I’ve had in the back of my mind since before the first W.A.S.P, but my lack of design ability at the time, mixed with low fund and not suitable contacts for getting the project off the group, it was something I couldn’t get done. However, that’s now changed… With new…
VSR / SSG10 W.A.S.P Kit Information
The VSR / SSG10 W.A.S.P: -Base VSR or SSG10 W.A.S.P Piston-1 x Polymer Sleeve-1 x Steel Sleeve Medium-1 x Steel Sleeve Heavy-Airbrake Fitting Long-Airsoft Fitting Short-Non-Airbrake Fitting– Sealing Cup (either VSR or SSG10)-One Piece Stainless Steel Spring Guide 13mm (normal spring guides can also be used)-2 x Guide Rings The VSR W.A.S.P works with a…
TAC-41 CYLINDER HEAD
TAC-41 CYLINDER HEAD INFORMATION: The Tac-41 Damper Cylinder head is an upgraded head designed to pair perfectly with the W.A.S.P. It features a dual bore nozzle design and a built in 40A damper pad to reduce sound and vibration of the rifle. This will work with SBA products too and some other aftermarket parts. This…
VSR10 / SSG10 Damper Cylinder Head
One of my newest products to drop is the VSR10 / SSG10 Damper cylinder head. This product follows the same design as the Tac-41 Damper head I made previously. It features the same dual bore nozzle designs, which can increase power and consistency (as always will vary by build), it has a build in 40A…
Tac-41 W.A.S.P KIT
TAC-41 W.A.S.P INFORMATION: The ORIGINAL Weight Adjustable piston is back, with an improved design and material tweaks. The Tac-41 W.A.S.P package features: 1 x Tac-41 W.A.S.P Base Piston body1 x Rear Sear1 x Rear Guide Ring1 x Front Guide Ring1 x Plastic Sleeve (Light)1 x Steel Sleeve (Medium)1 x Steel Sleeve (Heavy)1 x Non-Airbrake Fitting1…