Similar Posts
FLAMINGO BUCKINGS
The Flamingo buckings are something I’ve had in the back of my mind since before the first W.A.S.P, but my lack of design ability at the time, mixed with low fund and not suitable contacts for getting the project off the group, it was something I couldn’t get done. However, that’s now changed… With new…
VSR / SSG10 W.A.S.P Kit Information
The VSR / SSG10 W.A.S.P: -Base VSR or SSG10 W.A.S.P Piston-1 x Polymer Sleeve-1 x Steel Sleeve Medium-1 x Steel Sleeve Heavy-Airbrake Fitting Long-Airsoft Fitting Short-Non-Airbrake Fitting– Sealing Cup (either VSR or SSG10)-One Piece Stainless Steel Spring Guide 13mm (normal spring guides can also be used)-2 x Guide Rings The VSR W.A.S.P works with a…
SRS Teflon Fluted Cylinder
New cylinder for SRS rifles (Pull Bolt) This is a new drop in cylinder for the Silverback SRS Pull Bolt Rifles, designed and optimised for the SRS W.A.S.P The new design offers a nice consistent bolt pull and return, reduced sound over some cylinders due to better tolerances between cylinder and receiver. Additionally……it looks cool…
VSR10 / SSG10 Damper Cylinder Head
One of my newest products to drop is the VSR10 / SSG10 Damper cylinder head. This product follows the same design as the Tac-41 Damper head I made previously. It features the same dual bore nozzle designs, which can increase power and consistency (as always will vary by build), it has a build in 40A…
SRS W.A.S.P Kit
SRS W.A.S.P Information: The ORIGINAL Weight Adjustable piston is back, with an improved design and material tweaks. The SRS W.A.S.P package features: 1 x SRS W.A.S.P Base Piston body1 x Rear Sear1 x Rear Guide Ring1 x Front securing Ring1 x Plastic Sleeve (Light)1 x Steel Sleeve (Medium)1 x Steel Sleeve (Heavy)1 x Non-Airbrake Fitting1…